Posts Tagged ‘man smb(4)’

h1

Quick-Take: NexentaStor 3.1.3 New AD Group Feature, Can Break AD Shares

June 12, 2012

The latest update of NexentaStor may not go too smoothly if you are using Windows Server 2008 AD servers and delegating shares via NexentaStor. While the latest update includes a long sought after fix in AD capabilities (see pull quote below) it may require a tweak to the CIFS Server settings to get things back on track.

Domain Group Support

It is now possible to allow Domain groups as members of local groups. When a Windows client authenticates with NexentaStor using a domain account, NexentaStor consults the domain controller for information about that user’s membership in domain groups. NexentaStor also computes group memberships based on its _local_ groups database, adding both local and domain groups based on local group memberships, which are allowed to be indirect. NexentaStor’s computation of group memberships previously did not correctly handle domain groups as members of local groups.

NexentaStor 3.1.3 Release Notes

In the past, some of NexentaStor’s in-place upgrades have reset the “lmauth_level” of the associated SMB share server from its user configured value back to a “default” of four (4). This did not work very well in an AD environment where the servers were Windows Server 2008 and running their native authentication mode. The fix was to change the “lmauth_level” to two (2) via the NMV or NMC (“sharectl set -p lmauth_level=2 smb”) and restart the service. If you have this issue, the giveaway kernel log entries are as follows:

smbd[7501]: [ID 702911 daemon.notice] smbd_dc_update: myad.local: locate failed
smbd[7501]: [ID 702911 daemon.notice] smbd_dc_monitor: domain service not responding

However, the rules have changed in some applications; Nexenta’s new guidance is:

Summary Description CIFS Issue

A recent patch release by Microsoft has necessitated a changed to the CIFS authorization setting. Without changing this setting, customers will see CIFS disconnects or the appliance being unable to join the Active Directory domain. If you experience CIFS disconnects or problems joining your Active Directory domain, please modify the ‘lmauth_level’ setting.

# sharectl set -p lmauth_level=4 smb

– NexentaStor 3.1.3 Release Notes

While this may work for others out there it does not universally work for any of my tested Windows Server 2008 R2, native AD mode servers. Worse, it appears to work with some shares, but not all; this can lead to some confusion about the actual cause (or resolution) of the problem based on the Nexenta release notes. Fortunately (or not, depending on your perspective), the genesis of NexentaStor is clearlyheading toward an intersection with Illumos although the current kernel is still based on Open Solaris (134f), and a post from OpenIndiana points users to the right solution.

(Jonathan Leafty) I always thought it was weird that lmauth_level had to be set to 2 so I
bumped it back to the default of 3 and restarted smb and it worked...
(Gordon Ross) Glad you found that.  I probably should have sent a "heads-up" when the
"extended security outbound" enhancement went in.  People who have
adjusted down lmauth_level should put it back the the default.

– CIFS in Domain Mode (AD 2008), OpenIndiana Discussion Group (openindiana-discuss@openindiana.org)

Following the advice for OpenIndiana re-enabled all previously configured shares. This mode is also the default for Solaris, although NexentaStor continues to use a different one. According to the man pages for smb on Nexenta (‘man smb(4)’) the difference between ‘lmauth_level=3’ and ‘lmauth_level=4’ is as follows:

lmauth_level

Specifies the LAN Manager (LM) authentication level. The LM compatibility level controls the type of user authentication to use in workgroup mode or
domain mode. The default value is 3.

The following describes the behavior at each level.

2 – In Windows workgroup mode, the Solaris CIFS server accepts LM, NTLM, LMv2, and NTLMv2 requests. In domain mode, the SMB redirector on
the Solaris CIFS server sends NTLM requests.

3 – In Windows workgroup mode, the Solaris CIFS server accepts LM, NTLM, LMv2, and NTLMv2 requests. In domain mode, the SMB redirector on
the Solaris CIFS server sends LMv2 and NTLMv2 requests.

4 – In Windows workgroup mode, the Solaris CIFS server accepts NTLM, LMv2, and NTLMv2 requests. In domain mode, the SMB redirector on the
Solaris CIFS server sends LMv2 and NTLMv2 requests.

5 – In Windows workgroup mode, the Solaris CIFS server accepts LMv2 and NTLMv2 requests. In domain mode, the SMB redirector on the Solaris
CIFS server sends LMv2 and NTLMv2 requests.

Manpage for SMB(4)

This illustrates either a continued dependency on LAN Manager (absent in ‘lmauth_level=4’) or a bug as indicated in the OpenIndiana thread. Either way, more testing to determine if this issue is unique to my particular 2008 AD environment or this is a general issue with the current smb/server facility in NexentaStor…

SOLORI’s Take: So while NexentaStor defaults back to ‘lmauth_level=4’ and ‘lmauth_level=2’ is now broken (for my environment), the “default” for OpenIndiana and Solaris (‘lmauth_level=3’) is a winner; as to why – that’s a follow-up question… Meanwhile, proceed with caution when upgrading to NexentaStor 3.1.3 if your appliance is integrated into AD – testing with the latest virtual appliance for the win.