In-the-Lab: Tweak 2008R2 post-clone for View Transfer ServerApril 4, 2011
View Transfer Server supports Server 2008 R2 but does not support the use of the “default” virtual LSI Logic SAS controller. If you’ve already carved-out a cloning template using the LSI Logic SAS template, it is not necessary to create a new template (or fresh installation) just to spool-up a Transfer Server. In fact, it will take you TWO re-boots from clone completion to LSI Logic Parallel replacement.
CAUTION: You must configure the virtual machine that hosts View Transfer Server with an LSI Logic Parallel SCSI controller. You cannot use a SAS or VMware paravirtual controller.
On Windows Server 2008 virtual machines, the LSI Logic SAS controller is selected by default. You must change this selection to an LSI Logic Parallel controller before you install the operating system.
- VMware View Upgrades (EN-000526-00), Page 13
Here’s the process to take you from completed Server 2008/R2 clone with LSI Logic SAS to LSI Logic Parallel – by-passing the Windows blue screen at boot:
- Clone your Server 2008/R2 server as normal,
- Shutdown clone and edit settings,
- Change Options>Advanced>Boot Options to “Force BIOS Setup” on next reboot;
- Hardware>Add…>Hard Disk>Create a new virtual disk>4GB, Thin Provisioning>SCSI(1:0)
- Hardware>SCSI Controller 1>Change Type…>LSI Logic Parallel
- Boot the modified VM and (optionally) confirm new drive and controller
- Boot VM
- Modify boot order to insure SAS boot priority
- (optional) Open Server Manager>Diagnostics>Device Manager
- View “Storage controllers”
- Edit settings to modify boot and remove additional disk
- Hardware>SCSI Controller 0>Change Type…>LSI Logic Parallel
- Hard Disk 2>Remove>Remove from virtual machine and delete files from disk
- SCSI Controller 1 will automatically be removed
- Save and power-on
- Boot disk will now be LSI Logic Parallel
NOTE: In this example, the Server 2008/R2 VM is composed onto a single LSI Logic SAS disk (Hard Disk 1, SCSI controller 0). If your VM template is different, substitute your specific disk and/or controller numbers accordingly.
Nice, simple and now ready to install the View Transfer Server. Now on to the PCoIP Secure Gateway…